How to make a refrigerator bag with your own hands

Content:

What materials do we need?
Making a hand-held cooler bag
Homemade car refrigerator
Homemade cold accumulators
Useful Tips

A cooler bag is an autonomous device that can help out when you need to save food for a trip to nature, transfer purchases from a store or medicine that requires special conditions of detention. But what if the purchase of a thermal container or a car refrigerator is not affordable? This article will show you how to quickly and inexpensively make your own cooler bag.

What materials do we need?

In order to make a portable cooler bag, let's briefly understand how it works and what we may need in the process of making a "hand made" thermal container.

It is not entirely correct to call portable refrigerator bags that way, because they do not produce cold. Such bags, in fact, are just thermoses that maintain low temperatures for a certain time due to slow heat exchange with the environment.

Based on this, we determine what we need:

the bag itself - it can be sewn or adapted ready-made, the main thing is that it has a dense and reliable zipper;
thermal layer - for this in the store it is necessary to pick up a foil insulating material - foil insulation;
fastening materials - metallized tape or furniture stapler.

Also, as an auxiliary source of cold, you can use special batteries - sealed containers with saline solution. Cold accumulators are pre-frozen, and then slowly thawed in a thermal bag, maintaining low temperatures inside for a while. Cold accumulators can be bought in a store or made with your own hands, we will also tell you about this.

Making a hand-held cooler bag

Believe me, even if you are absolutely not friends with a sewing machine or a needle and thread, it will not be difficult for you to sew a thermal bag. This process will take you very little time. But the result - a finished bag - will serve faithfully for a long time, reliably preserving food, drinks or medicine from the destructive effects of heat and heat.

So, first you need to make a pattern - a pattern for the inside of the bag. As a rule, sports or travel rectangular bags with a flap and a zipper around the perimeter are taken as a basis. This variant of the bag will be the most practical.

The pattern will look like a large cross, divided into sectors - according to the size of the bottom and sides of the original bag. Don't forget to include the lid of the bag. Further, this scheme must be transferred to Foiloisolone. Remember that the pattern made of foil insulation should be slightly smaller than the original pattern - so that the model of the container made of thermal material fits freely inside your bag.

Assemble the pattern from the thermal material, carefully gluing the joints with foil tape. If you can sew a zipper to your foil-insulated container, such a cooler bag will become many times more effective.A tightly closing compartment is a guarantee of slow heating of the food inside.

When the foil container is ready, insert it inside the original bag and fasten them together with double-sided tape or a stapler. That's all - the cooler bag is ready!

Homemade car refrigerator

If a compact refrigerator bag is not enough, you can always make a roomy thermo-container for transportation in the trunk of a car. Such a homemade chest will be able to help you out during a trip to nature with a large company, or during a holiday with "savages". Let's figure out how to make a refrigerator for a car out of foam plastic.

First of all, choose the right size plywood box. If possible, such a box is easy to assemble yourself. It's good if the lid of the drawer is attached with hinges, but if you don't have one, don't worry, any tight-fitting lid will do.

By and large, you can use a cardboard box, but a car refrigerator made of such a material will not turn out to be very durable.

So, if you have found the right box, then the next step is to make foam insulation filling for it. It is necessary to glue or knock off all the inner surfaces of the box with foam. The thicker, the more reliable. Instead of tiny foam, you can use Penoplex. Use double-sided tape, acetone-free glue, or a furniture stapler for stapling. The inside of the lid should also not be ignored.

After that, it is necessary to carefully cover the inside of the box with foil insulation and attach the insulating material, and also carefully glue all the joints inside the future auto-refrigerator with tape.

In principle, the refrigerator is ready. Do not forget to just attach the opening handle to the lid and cool the thermal container well before use. The better the assembly is done, the more hermetically sealed your car refrigerator, the longer it will be able to maintain a low temperature inside itself. Such a device turns out to be quite heavy, which is why it is best to carry it in the trunk of a car.

Homemade cold accumulators

We have already mentioned that cold accumulators are great helpers if you need to use an autonomous thermal container for storing food. If you are not ready to go to the store, then make a cold accumulator with your own hands at home.

The store battery uses a special saline solution that defrosts much more slowly than ordinary water. Making it with your own hands is not difficult, just dissolve ordinary kitchen salt in the required amount of water and pour such a solution into suitable plastic bottles or vacuum bags with a Zip Lock fastener. Filled bags or bottles should be frozen to help keep the temperature inside the container cool.

There are also helium cold accumulators. They are much more expensive than their liquid counterparts, but defrost at times slower. If you want to make such a cold accumulator, then buy several large baby diapers at the pharmacy. Gently and slowly pour ordinary tap water, about a glass, inside the diapers. Wait a bit - let the granules absorb the moisture. Then, tear the inside of the diaper and pour the wet granules into an airtight bag.

Cold storage accumulators should be frozen beforehand. And when putting food inside the refrigerator bag - do not forget to shift layers of food with cold accumulators.

Useful Tips

So, if everything is clear, then you can start making a cooler bag. But finally, we want to share some useful tips that will make the process of manufacturing a thermal bag easier for you and increase the efficiency of using such a device.

Thermal layer thickness - the more the better. When you come to a hardware store, buy foil insulation from 0.5-0.8 cm, and foam - from 2-3 cm.
You can buy folgoizolon in a large hardware store, and the price for it will absolutely not hit your pocket. Material consumption - from 1 - 1.5 m.
It is better to choose a bag for a portable refrigerator from dense, water-repellent materials that are highly durable and at the same time can be easily washed from dirt.
Make sure the handles and pockets are tightly sewn on, and the fasteners close the thermo bag tightly. In good production models, the outer zipper is covered with a special Velcro flap - to reduce heat transfer.
For the convenience of using a car refrigerator, a cover with handles can be sewn onto a plywood box. Do not forget to put pieces of padding polyester, a cut blanket or any other insulation between the plywood and the cover - this way, you will protect the contents of the thermal container from rapid heating.
It is better to transport any thermal container in a large bag with other things or in the trunk of a car. Do not expose your portable refrigerator to direct sunlight and try to open it as little as possible.
If you thaw frozen cold storage accumulators that you made yourself, condensation may occur - take this into account and take care that moisture does not spoil the food. For example, wrap everything in separate newspaper sheets.
When loading food into a freestanding refrigerator, remember that there should be as few gaps and voids inside the thermal container as possible. Do not forget to transfer food with cold accumulators or regular ice packs.

With proper manufacturing, care and following our simple recommendations, your thermal bag or auto-refrigerator will pleasantly surprise you with its efficiency, reliability and durability. At the same time, it is nice to know that you were able to save a tidy sum, because in the store such a purchase will cost a significant amount. You can make several thermal containers of different sizes - small boxes for individual snacks at school, in the office or at training, travel bags for 4-5 liters for purchases or modest picnics, roomy backpacks from 10 liters for large companies and impressive blanks, etc. ... Now, knowing how to make a cooler bag with your own hands, it will not be difficult for you!

See also: