The developer Clever Panda continues to improve its models, equipping them with all the new features. The Panda X1 robot vacuum cleaner is one of them. This vacuum cleaner is adapted for dry cleaning and has a full function of wet cleaning. In the review, we will take a closer look at the technical parameters and functions of the Panda X1.
Appearance
The Clever Panda X1 vacuum cleaner has a modern stylish design. The device has a standard round shape, its diameter is 34 cm. The average height is 8 cm. It weighs 3.2 kg. The body is made of high quality plastic in black or gold. The robot is equipped with a large set of sensors that detect obstacles, detecting changes in height, determining the dirtiest places and the degree of cleanliness of the surface to be cleaned.
On the top panel there are touch control buttons, a timer and an obstacle detection sensor. Along the side circle there is a power button, an adapter connector, all sensors, as well as openings for air outlet. On the bottom there are:
- two driving wheels and one swivel in front;
- two side brushes;
- dust suction hole;
- battery compartment;
- ultraviolet lamp;
- fasteners for microfiber napkins.
Specifications
The technical parameters of the device are as follows:
- removes on a single charge: up to 80 sq.m;
- dust container volume: 0.7 l;
- overcomes thresholds: up to 2.5 cm;
- power consumption: 125 W;
- operating modes: 7;
- there is a timer;
- there is an ultraviolet lamp;
- indicators for filling the dust compartment, overheating and overloading the engine;
- gyroscope;
- noise: 45-50 dB.
In stand-alone mode, the device can work up to 120 minutes. It is equipped with a 2200 mAh Li-Ion battery. It takes 240 minutes to charge.
Functionality
The Clever Panda X1 robot efficiently cleans all floor coverings, including carpets with piles up to 4 cm. In addition, it disinfects the surface with an ultraviolet lamp. It works in the following modes:
- Auto. The vacuum cleaner cleans the entire room according to an independently developed movement schedule.
- Local. Provided by the SPOT program, the principle of which is to cleanse the dirtiest areas. The robot detects them using sensors.
- Zigzag movement. Designed for long rooms.
- Perimeter cleaning. The robot moves along the walls.
- Cleaning function for corners and hard-to-reach places.
- Scheduled work.
- Continuous cleaning mode with recharge.
Wet cleaning is carried out using a stationary unit, which is mounted in the device, and is not installed additionally, as in many robots. Water flows from there automatically to the cleaning cloth. One filling of the tank is enough to wipe up to 80 square meters of housing. The wet function is complemented by the possibility of aromatization.
Before the start, the device builds the optimal route of movement around the room, evaluating it with its sensors. Then he chooses an acceptable cleaning method. If the device enters a dirty spot, a special sensor informs it about the need to increase the suction power to clean this area. And all other sensors provide systematic accurate orientation.
The virtual wall is designed to be able to cut off part of the room from the robot's passage into it. The updated wheel design and the absence of a turbo brush allow the vacuum cleaner to freely overcome obstacles and easily clean the floor under the furniture.Using the timer, you can set a convenient time to start cleaning.
Equipment
When purchasing Clever Panda X1, the user receives the following components:
- robot;
- Charging base;
- battery;
- remote control;
- two side brushes;
- two napkins;
- spare HEPA filter;
- virtual wall;
- a brush for cleaning the trash container;
- instruction.
Advantages and disadvantages
I would like to summarize the review by listing the main pros and cons of Clever Panda X1.
Benefits
- nice design;
- lack of a turbo brush on which the hair is wound;
- many operating modes;
- well equipped with sensors and indicators;
- programming system with the possibility of a delayed start on days of the week;
- built-in device for wet floor cleaning;
- low noise level.
The disadvantages are:
- simple navigation;
- does not build a room map;
- water supply is not blocked when stopped;
- cannot be controlled from a smartphone;
- does not clean well.
The cost of the robot is 19 thousand rubles. For such a price, it has a fairly well thought-out functionality and cleans the room quite efficiently.
See also - 10 best robotic vacuum cleaners under 20,000 rubles
See also: robotic vacuum cleaners up to 20,000 rubles
