How to repair an airfryer with your own hands

If your household appliances are out of order, then you shouldn't say goodbye to them. You don't even need to take it to a service center. Instead, check out the instructions and tips to help you do your DIY Airfryer repair.. Common malfunctions have long been described, and the design is clear and not particularly complex, so you can get down to business.

Constructive features of the airfryer

Convection oven is a kind of air draft oven, a mixture of a heater and a fan. A special grill serves as a heating element, which in turn is blown by air currents. The primary heat source is an infrared lamp. All of these critical parts are separated from the glass bowl where the food is placed.

The design usually consists of several elements:

• sealed glass bowl;
• quartz lamp, covered with a grate and slightly lowered inside the bowl;
• a fan, consisting of lower and upper blades (the lower ones work to blow food, and the upper ones cool the motor);
• partitions between the blades with holes for air outlet;
• bimetallic plate for temperature control;
• control unit and display system.

The lid is usually equipped with a functional handle that completely disconnects the power when opened. Cooking starts only when the appliance is sealed. Problems can be associated with the listed elements, so do-it-yourself airfryer repair often begins with diagnostics.

Advice:

Read also: The washing machine does not heat the water - what should I do?

Common problems

Any repair of a do-it-yourself electric grill or similar device requires familiarity with the internal structure. The wiring diagram consists of a switch on the cover and a handle. From it, the signal goes through a timer to the motor that starts the fan. Relays and quartz lamps are connected in parallel.

Often you have to deal with the following malfunctions:

• the device does not turn on and does not respond to control;
• the device heats up weakly;
• the fan of the airfryer does not spin;
• the main control unit has broken.

Typically, a chicken weighing about 1.5 kg is cooked for about 1 hour. The degree of readiness can be observed through the transparent walls. If the terms noticeably increase, then this indicates possible malfunctions. There are other problems - the airfryer simply does not respond to button presses or other malfunctions occur. But your device can still be repaired.

Causes of malfunctions and preparation for the repair of the airfryer

The design of this device has already been considered above. It is not difficult, which allows you to quickly repair the airfryer with your own hands. Usually one of three main components breaks:

• thermal fuse;
• a heating element;
• Control block.

The third option is the most serious problem, because in this case it is quite difficult and expensive to repair the device. In addition, only specialists should be engaged in restoration, but even they cannot guarantee a 100% result.

Breakdowns of the thermal fuse and heating element can be easily eliminated, and you can do everything yourself with minimal knowledge and tools. For this, a multimeter is suitable, with which all the elements are called.

Advice:

Read also: How to disassemble and repair the iron yourself

Do-it-yourself quick repair of an airfryer

If the heating element is out of order, then you can simply buy a new heating element. An ordinary steel model is inexpensive and can last for a dozen years. However, the disadvantages include slow heating, high energy costs. You can spend a little more, but buy more efficient carbon or halogen heaters.

If the problem lies in the thermal fuse, then usually the airfryer does not turn on at all. A short-term power surge often leads to this problem. Before taking any serious action, though, it's best to also check the outlet and wiring.

Do-it-yourself disassembly of the airfryer is performed in several stages:

• the quartz lamp grate is unscrewed;
• the lower fan blades are dismantled;
• the partition between the blades is removed;
• the upper "cage" is removed (the motor of the device opens behind it);
• the quartz lamp is removed, which is fastened with brackets to the partition;
• if you need to replace the quartz lamp, you need to dismantle the cable connectors.

Before starting work, you should carefully examine the body of the airfryer and find all the screws that are hidden in deep grooves or behind decorative plugs.

The steel blades should be removed from the rear, where the grip nut is usually located. This will be much more convenient and safer.

Advice:

Read also: DIY sewing machine repair

Do not forget that before you start repairing your Airfryer, carry out a full diagnosis. There are several reasons that can be misleading:

• the outlet is out of order;
• the device is incorrectly configured or the wrong mode is selected;
• the cover is not fully closed.

Sometimes it’s cheaper to replace one or another part than to buy a new airfryer. You can repair it yourself quickly and efficiently.

See also - Which is better than an airfryer or multicooker?