Review of the robot vacuum cleaner iCLEBO Pop

Content:

Specifications
Equipment
Design
Functional
Advantages and disadvantages

The bright and beautiful iClebo Pop model is a simplified version of the model of the Korean manufacturer iClebo Arte. It lacks a camera, a smart advanced navigation system, a second side brush, which has reduced the cost of the model. At the same time, the manufacturer positions it as an excellent device for cleaning hard-to-reach places. The review examines the main technical characteristics and functionality of the model, how much the above upgrades affected the performance of the vacuum cleaner.

Specifications

Provides dry and wet cleaning.
Waste collection in a 600 ml cyclone filter.
Wet cleaning in floor polishing mode.
Equipped with an electric brush.
Li-lon rechargeable battery with a capacity of 2200 mAh, battery life 120 min, charging lasts 110 minutes.
The noise is no higher than 55 dB.
20 sensors on the body.
Automatic docking installation.
For one charge, it processes an area of up to 70 square meters.
Control via touch buttons on the body, IR remote control.
Suction power 10 W.

The average cost of the model is 20,000 rubles. On sale you can find models in yellow, pink and gray design.

Equipment

Dock station.
Remote control and batteries for it.
Power supply and charger.
User's manual.
Side brush.
Two replaceable filters.
Comb and brush for cleaning.
Microfiber cloths in the amount of two pieces.
Pallet.

Design

A compact round robot, available in bright colors - yellow, pink and modest gray. The lower edges are chamfered for easy passage of obstacles. The upper part of the case is covered with laminated plastic, there are touch control buttons and an infrared receiver from the remote control.

The side part and the bottom are made of high-strength matte plastic. On the front of the robot there is a special protrusion, the highest part of the product, with its help the vacuum cleaner determines the height under which it can pass.

A dust collector is attached to the back, on the right is a power connector and an on / off button. At the bottom there is a side brush, two pads for contact with the docking station, driving wheels and a dust collector body.

The robot is equipped with sensors for viewing the room and ease of movement in it, these same sensors help to identify obstacles and possible obstacles. There is a sensor for detecting height, approaching an object identified as an obstacle, a base search sensor, all of them are located on the bumper.

Functional

The work is carried out in three modes:

Local - intensive cleaning of one specified area, in which the robot moves in a spiral.
Automatic - chaotic trajectory, time-limited mode.
Maximum - work goes on until the battery is completely discharged over the entire area of the room.

There is also a manual mode, it is activated from the remote control, it starts up only after the robot is started in automatic mode. If you do not start auto mode, the robot will move, but will not start cleaning.

The debris is removed by the front brush, which rakes it to the center of the device, where the main brush and rubber scraper are located. With the help of all these devices, the garbage is collected and sent to a dust collector. Large and heavy pieces of debris are sucked in by the dust collector on their own, the lungs fall into the tank with a two-layer filter, where they settle.

To ensure wet cleaning, a microfiber cloth is attached to a special bar behind the main brush. The napkin can be moistened. When installing the napkin, the Climb mode is turned off, since the nozzle can cling to small obstacles that the sensor detects.

The side brush of the model has been improved, it is covered not only with nap, but also with flexible wires. All parts of the brush are set on a rubber base, the villi come out of it at an angle, which makes their performance higher. The dust container lid is located at the top for easy cleaning.