Today, the most important assistant to the hostess in the kitchen is the dishwasher. The home unit is able to cleanly wash all kinds of dirty dishes. But as with any household appliance, various problems can also occur with it. Often, equipment owners are faced with the fact that the dishwasher does not collect water. This may indicate both serious breakdowns and minor defects, or errors with the connection.
Home dishwasher does not collect water: causes of breakdowns and malfunctions
Currently, household appliances are used by various manufacturers - Ariston, Bosch, Beko, Siemens, Aeg. They differ from each other in technical parameters - dimensions, capacity, power, energy consumption and various operating modes. Despite this, the principles of operation are generally about the same, therefore, the same reasons can be considered because of which water does not enter the machine.
The most common causes of dishwasher failure are:
- malfunction or incorrect connection of the inlet filter;
- clogged internal water filters;
- door malfunction;
- incorrect operation of the water level sensor (pressure switch);
- malfunction of the control system.
The dishwasher brand, as already mentioned, does not play a special role. The causes of breakdowns are usually about the same, so you can consider the days and the same options, as well as repair methods.
However, some models of clippers, usually more modern, are equipped with the AquaStop system. It introduces a leakage protection system. The hose through which the water flows is covered with a protective casing. In the event of an accident, the system is capable of shutting off the water supply. In some cases, a malfunction of the AquaStop system prevents water from being drawn into the dishwasher. This option also cannot be discounted.
See also - Tablets won't dissolve in the dishwasher - what should I do?
Why isn't water getting into the dishwasher?
Usually, the breakdown of household appliances can seriously scare, but you should not worry ahead of time. On your own, it is quite possible to establish the main causes of the malfunction of your own equipment, if you approach this issue correctly. Most often, the technique does not work due to the fact that the hose is incorrectly connected through which water enters.
If the machine worked properly for a long time, and then suddenly does not pump water, then the whole thing may be in clogged filters. Dirt builds up in the pipes, preventing the flow of water.
Sometimes the owners of the equipment do not notice that the water hose has been squeezed by something or the front door simply does not close tightly for some reason. The unit itself only hums and refuses to start the cycle. Little things like that can seriously ruin the experience.
Dishwasher won't draw water - what should I do?
Experts offer several effective and useful tips that allow you to carry out a kind of diagnosis at home. To do this, it is recommended to do a few simple steps:
- make sure there is water in the tap;
- check if the inlet valve is accidentally closed;
- note how tightly the door is closed.
Such advice sometimes seems naive, but often the reason lies precisely in this. Heavy objects can fall onto the dishwasher, blocking valves or pinching hoses. Over time, the door itself can also fail, which is why it stops closing poorly. In this case, water does not flow inside, as the sensor does not receive an enable signal.
Diagnosing the causes and troubleshooting the dishwasher
Ordinary tap water is quite hard, so over time, salt deposits and just dirt form on the walls. In tight spaces such as a dishwasher valve, a kind of plug will form. In this case, shut off the water access with a tap. After that, you can disconnect the water hose and remove the mesh filter. Clean it with special means and connect everything back.
Over time, the intake valve can break, so it stops opening when a signal is given. The machine is just humming or completely silent. This happens periodically due to voltage surges or something similar. Only a complete replacement of this part will help to correct the situation.
The dishwasher door should click to close. If not, then it is clearly broken. In this case, it is better to contact a specialist who can replace the locking device.
Roughly the same situation is with the dishwasher pressure switch - water level sensors. It provides information about the state of the water inside. If this module fails, then the smart machine simply does not understand how much water needs to be poured inside. The fault can only be rectified after a complete replacement of the module.
The modern AquaStop system is designed to prevent the risk of leaks, but sometimes it also brings various problems. Smart technology requires expert supervision. They carry out diagnostics, after which they carry out repairs or completely change it.
Do not forget that many problems are quite common, but sometimes the owners are faced with something unusual. If standard actions do not help, then it is better to ask specialists what to do and why the equipment fails.
See also - Rating of the best built-in dishwashers 45 cm
